My cucumbers never fruited. Here is a few things of what went wrong. First I needed to thin out the blossoms to one every 12-18 inches per vine. Second the blossoms needed hand pollination. My vines were producing both female(ones with little cucumber) and male ones.
I am not taking this as a total failure though. The vines grew long and had a couple hundred blossoms on them. None of the fish died. The salad greens also flourished. No bugs or mosquitoes. So actually for a "proof of concept" design it works as it should.
Going forward I plan on expanding some of the systems. Automatic fish feeding, auto water top off and possibly a Arduino controller for light and temp monitoring. Eventually a pH prob and dousing pump to automatically control pH is planned. But in the meantime I will be planting some cherry tomatoes.
Sunday, May 26, 2013
Saturday, January 19, 2013
01-20-2013 Update, Success!
Tuesday, January 15, 2013
pH, ammonia and temperature
These are a few odds and ends you will need but have not been mentioned up until now. There are two water parameters you need to monitor in the aquaponics system. pH and ammonia. The pH needs to be around 5.5-7.0. I will usually adjust it at night to 6.4-6.8 then by the next night it gets down to 5.5-5.8. To test for this I use a digital pH meter I purchased off eBay for under $20. Took less than 2 weeks to come from Hong Kong. It was tested it against a chemical pH test kit and it is accurate.

The pH is the yellow one on the left. Next to is a ppm meter. You need that one for a hydroponic setup but I don't hear it mentioned in aquaponics. Then on the right is a Lux meter. It is used to measure the amount of light.

In addition to pH the ammonia level needs to be monitored. This especially important while the system is cycling. I have chosen a ammonia tester that mounts in the tank and has a dot in the center that changes color as the ammonia level changes. It has 4 levels from 'safe' to 'toxic' It is just easier than the test strips or test tube and chemical test. They say it lasts about a year on the package. This is also the first time the three fish have let me get a good photo of them.
Next to the ammonia tester is a thermometer. This just attaches to the outside of the tank. It is large and easy to read. In order to keep the temperature between 70-78ยบ an aquarium heater is used. During the summer down here in Florida it will be unplugged but in winter it is needed.

Then here is a picture of the tank setup.

One other tool I use is a Kil-A-Watt meter.

With this tool you can monitor how much power this setup is using. I like to keep tract of how much money in electricity this is costing. Not necessary but good info to know.
The pH is the yellow one on the left. Next to is a ppm meter. You need that one for a hydroponic setup but I don't hear it mentioned in aquaponics. Then on the right is a Lux meter. It is used to measure the amount of light.
In addition to pH the ammonia level needs to be monitored. This especially important while the system is cycling. I have chosen a ammonia tester that mounts in the tank and has a dot in the center that changes color as the ammonia level changes. It has 4 levels from 'safe' to 'toxic' It is just easier than the test strips or test tube and chemical test. They say it lasts about a year on the package. This is also the first time the three fish have let me get a good photo of them.
Next to the ammonia tester is a thermometer. This just attaches to the outside of the tank. It is large and easy to read. In order to keep the temperature between 70-78ยบ an aquarium heater is used. During the summer down here in Florida it will be unplugged but in winter it is needed.
Then here is a picture of the tank setup.
One other tool I use is a Kil-A-Watt meter.
With this tool you can monitor how much power this setup is using. I like to keep tract of how much money in electricity this is costing. Not necessary but good info to know.
Sunday, January 13, 2013
1-13-13 Update
Just a couple pictures of the system.

As you can see the cucumber is getting big. It is pretty much dominating the grow bed. The dill is getting crowded out and I don't expect it to do well when the other cucumber starts coming on.

There are a bunch of flowers starting, too many to count. Hopefully that means lots of cucumbers to make pickles from.
As you can see the cucumber is getting big. It is pretty much dominating the grow bed. The dill is getting crowded out and I don't expect it to do well when the other cucumber starts coming on.
There are a bunch of flowers starting, too many to count. Hopefully that means lots of cucumbers to make pickles from.
Saturday, January 5, 2013
01-06-2013 Update
Thursday, January 3, 2013
Some close ups
Some close ups of my plants

The cucumber is becoming crowded. I should not have grown three in one rockwool cube. Will have to thin it out. A couple of the microgreens are below it.

These are some of the mesclun mix growing well. I also put some seeds right in the expanded clay pebbles. Some have sprouted.
The cucumber is becoming crowded. I should not have grown three in one rockwool cube. Will have to thin it out. A couple of the microgreens are below it.
These are some of the mesclun mix growing well. I also put some seeds right in the expanded clay pebbles. Some have sprouted.
Saturday, December 29, 2012
Growth
This is how the system is growing along.
December 15th, 2012

There are little flags identifying what is planted where. On the left is a #1 and also on the right in the middle. This is the mesclun mix seedlings. One the left on in the middle is a white onion from a onion set. This was just put in for fun. The #2 flag is for the microgreens. The back right side by the water inlet is the cucumbers.
December 21, 2012

You can see how much growth has happened in a few days. The cucumber just keeps getting bigger every day as well as the white onion. In the back behind the siphon are 2 dill plants and a couple of onion from seed. As you can see the microgreens and mesclun are reaching for the light. So I will have to double up on the lights. At this point in the aquarium it seems like it has cycled. The ammonia is at a safe level and the fish are happy.
December 24, 2012

Just one last one. Everything is just growing really fast. The onion planted from the set will probably be removed. I did not plan on that thing growing like it did. Now you can really see the plants all going towards the center to the light. A new lamp hood with double the lamps is needed.
December 29, 2012

The onion was removed as some of the microgreens.
December 15th, 2012
There are little flags identifying what is planted where. On the left is a #1 and also on the right in the middle. This is the mesclun mix seedlings. One the left on in the middle is a white onion from a onion set. This was just put in for fun. The #2 flag is for the microgreens. The back right side by the water inlet is the cucumbers.
December 21, 2012
You can see how much growth has happened in a few days. The cucumber just keeps getting bigger every day as well as the white onion. In the back behind the siphon are 2 dill plants and a couple of onion from seed. As you can see the microgreens and mesclun are reaching for the light. So I will have to double up on the lights. At this point in the aquarium it seems like it has cycled. The ammonia is at a safe level and the fish are happy.
December 24, 2012
Just one last one. Everything is just growing really fast. The onion planted from the set will probably be removed. I did not plan on that thing growing like it did. Now you can really see the plants all going towards the center to the light. A new lamp hood with double the lamps is needed.
December 29, 2012
The onion was removed as some of the microgreens.
Subscribe to:
Posts (Atom)